Tools
A compact set built around commonly needed drilling, driving, or fastener work instead of a single-use accessory.
Why it caught our attentionThe DEWALT DWA2FTS22IR packs 22 FlexTorq impact-rated bits (Phillips, square, Torx and slotted) plus a magnetic screw-lock sleeve into a connectable ToughCase+ with a clear lid and bit-bar layout. DEWALT says the extended FlexTorq zone handles high-torque hard joints and the CNC-machined tips reduce cam-out, which makes it a solid refill kit for any impact driver.
Tools
A compact set built around commonly needed drilling, driving, or fastener work instead of a single-use accessory.
Why it caught our attentionThe DEWALT DWAF2504TG Tough Grip set packs 26 accessories plus a ToughCase+: short insert bits, 2-inch power bits, a magnetic bit-tip holder, a 1/4-inch nut driver, and four titanium-nitride hex-shank drill bits. It is a compact shop and jobsite kit for screwdriving and light drilling with impact drivers.
Garage & Shop
WORKPRO 6.5-Inch Long Nose Locking Pliers is aimed at people trying to make garage and shop work less cluttered and more efficient.
Why it caught our attentionThe WORKPRO 6.5-inch long-nose locking pliers use chrome-molybdenum jaws with a curved long-nose profile for clamping in tight spots. A locking adjustment screw sets jaw pressure, and the release lever frees the grip when the job is done. Handy for shop, auto, and general fastening work.
Tools
A 45-piece DEWALT screwdriving bit set with a magnetic drive guide, nut drivers and double-ended bits in a clear-lid Tough Case.
Why it caught our attentionA 45-piece DEWALT screwdriver bit set in a clear-lid Tough Case, with Phillips, slotted, square, Torx and hex bits, nut drivers and a magnetic bit holder for drills and drivers.
Automotive
NOCO GENIUS1 1A 6V/12V Smart Battery Charger and Maintainer is aimed at DIY vehicle owners looking for a useful driveway or garage problem-solver.
Why it caught our attentionA compact 1-amp smart charger and maintainer from NOCO for 6V and 12V batteries, including lithium (LiFePO4), AGM and lead-acid types, sized for keeping vehicle, RV, solar and small-engine batteries topped off. See NOCO for specs and compatibility.
Tools
Klein Tools RT210 GFCI Outlet Tester is aimed at DIYers and homeowners looking for a tool with a clear job to do.
Why it caught our attentionKlein's RT210 plug-in receptacle tester checks standard and GFCI outlets for common wiring faults like open ground, open neutral and reversed polarity, with a GFCI trip button. See Klein's documentation and consult a licensed electrician for repairs.
Tools
Klein Tools NCVT1P Non-Contact Voltage Tester Pen, 50 to 1000V AC is aimed at DIYers and homeowners looking for a tool with a clear job to do.
Why it caught our attentionThe Klein Tools NCVT1P is a pocket voltage tester pen that detects 50 to 1000V AC without contact in cords, breakers, switches, fixtures and standard outlets. A green LED confirms it is on, a red LED and tone signal voltage, and it carries a CAT IV 1000V rating with 6.6-foot drop protection and auto power-off. Klein notes it is not meant for tamper-resistant outlets; follow the Klein manual and use a licensed electrician for electrical work.
Tools
CRAFTSMAN 6-Inch Diagonal Cutting Pliers (CMHT81646) is aimed at DIYers and homeowners looking for a tool with a clear job to do.
Why it caught our attentionThe CRAFTSMAN CMHT81646 is a 6-inch pair of diagonal cutters made from drop-forged steel, with induction-hardened cutting edges that stay sharper longer, a corrosion-resistant chrome finish and multi-zone bi-material grips. CRAFTSMAN backs it with a full lifetime warranty, and it is a handy everyday cutter for the shop drawer, tool bag or glovebox kit.
Power & Generators
LiTime 60A MPPT Solar Charge Controller, 12V/24V/36V/48V Auto, Non-Bluetooth is aimed at homeowners building a more capable portable-power or preparedness setup.
Why it caught our attentionThe LiTime 60A MPPT controller manages solar charging for 12, 24, 36 or 48V battery banks, detecting system voltage automatically. An LCD shows PV, battery and load status, it supports common lead-acid and lithium battery profiles, and it adds an RS485 port and a temperature-sensor input in a wall-mount metal housing.
Tools
Klein Tools 3010CR Solar Ratcheting Crimper for MC4 Connectors is aimed at DIYers and homeowners looking for a tool with a clear job to do.
Why it caught our attentionThe Klein Tools 3010CR is a compact ratcheting crimper built for MC4 solar connector contacts. Its stepped dies handle 14, 12 and 10 AWG, and the ratchet holds pressure until a full cycle completes, with a release lever if you need to back out. Dual-material grips keep the 8.9-inch tool comfortable for a run of panel leads.
Automotive
A compact automotive emergency-preparedness format for drivers who want a dedicated roadside backup tool.
Why it caught our attentionLazyshine rates this 12V jump starter at 4,000A peak for gas and diesel engines up to 10.0L, and builds in a 150PSI tire inflator with preset modes and auto shutoff. It also works as a USB power bank and LED light, and the brand lists 10 protections including reverse polarity, short circuit, overcurrent and overcharge.
Automotive
The NOCO GENIUS2 is a 2A smart battery charger, maintainer and desulfator for 6V and 12V lead-acid batteries, including flooded, gel and AGM, and 12V lithium-ion batteries. Its thermal sensor adjusts charging to ambient temperature.
Why it caught our attentionThe NOCO GENIUS2 is a 2-amp charger, maintainer and desulfator for 6-volt and 12-volt lead-acid batteries (flooded, gel, AGM and maintenance-free) plus lithium-ion batteries. It can detect and charge batteries as low as 1 volt, a manual Force Mode handles batteries below that, an integrated thermal sensor adjusts the charge cycle to ambient temperature, and the whole process runs automatically; NOCO says it is about a third smaller than the older G1100.